EU Declaration of Conformity Report Machinery Regulation
EU Declaration of Conformity Report Machinery Regulation
CEM4 Template
Regulation (EU) 2023/1230 the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC. (OJ L 165/1 of 29.06.2023)
_______
ANNEX V EU DECLARATION OF CONFORMITY AND EU DECLARATION OF INCORPORATION
PART A
EU declaration of conformity of machinery and related products No … (1)
The EU declaration of conformity shall contain the following particulars:
1. The machinery or related product (product, type, model, batch or serial number) or substantially modified machinery or related product.
2. Name and address of the manufacturer and, where applicable, its authorised representative.
3. For lifting machinery which is intended to be permanently installed in a building or a structure and which cannot be assembled in the manufacturer’s premises but can only be assembled at the place of use, the address of that place.
4. This declaration of conformity is issued under the sole responsibility of the manufacturer.
5. Object of the declaration (identification of the machinery or related product allowing traceability; where necessary for the identification of the machinery or related product, a colour image of sufficient clarity may be included).
6. The object of the declaration referred to in point 5 is in conformity with the following Union harmonisation legislation.
7. References to the harmonised standards referred to in Article 20(1) or common specifications adopted by the Commission in accordance with Article 20(3) that were applied, including the date of the publication of the reference to harmonised standards in the Official Journal of the European Union or of the common specification, or references to the other technical specifications, including their date, in relation to which conformity is declared. In the event of partial application of harmonised standards or common specifications, the EU declaration of conformity shall specify the parts which were applied.
8. Where applicable, the notified body … (name, number) … performed the EU type-examination (Module B) and issued the EU type-examination certificate … (reference to that certificate), followed by conformity to type based on internal production control (module C) or the conformity based on unit verification (module G) or full quality assurance (module H).
9. Where applicable, the machinery or related product is subject to the conformity assessment procedure based on internal production control (Module A).
10. Additional information:
Signed for and on behalf of: …
(place and date of issue):
(name, function) (signature):
 EU Declaration of Conformity Report Machinery Regulation | [CEM4 July 2023] | [EN] | 202 kB | 459 Downloads |
- Published: 16 July 2023
- Hits: 7042
