ISO/DIS 12895:2024

ISO/DIS 12895
Safety of machinery - Identification of whole body access and prevention of associated risk(s)

This document was prepared by Technical Committee ISO/TC 199, Safety of machinery.

This document is a type-B standard as stated in ISO 12100:2010.

This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:

- machine manufacturers (small, medium and large enterprises);
- health and safety bodies (regulators, accident prevention organisations, market surveillance);

Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups:

- machine users/employers (small, medium and large enterprises);
- machine users/employees (e.g. trade unions, organizations for people with special needs);
- service providers, e.g. for maintenance (small, medium and large enterprises);
- consumers (in case of machinery intended for use by consumers).

The above-mentioned stakeholder groups have been given the possibility to participate in the drafting process of this document.
In addition, this document is intended for standardization bodies elaborating type-C standards.

The requirements of this document can be supplemented or modified by a type-C standard.

For machines which are covered by the scope of a type-C standard and which have been designed and built according to the requirements of that type-C standard, the following applies: if the requirements of that type-C standard deviate from the requirements in type-B standards, the requirements of that type-C standard take precedence over the provisions of other standards.

The effectiveness of certain measures described in this document to minimize or reduce risk relies, in part, on the relevant parts of that equipment being correctly positioned in relation to the hazard zone. In deciding on these positions, a number of aspects are taken into account, such as

- the necessity of a risk assessment according to ISO 12100:2010;
- the practical experience in the use of the machine;
- the bio-mechanical and anthropometric data;
- the possibility of undetected access to the hazard zone;
- the possible undetected presence of a person inside the safeguarded space and the hazard zone(s).

[...]

Add